Solar PV

Solar PV - Solar PV Laminates - Solar PV Panels

Solar PV laminates are fixed to metal standing-seam roofing sheets. These lightweight units can be applied to a wide variety of roof shapes

Solar PV Laminates

Solar PV Laminates - Image Provided by KalzipSolar PV Laminates are constructed from extremely robust amorphous silicon thin film panels that are bonded to aluminium carrier panels. They have been designed to be fitted to metal standing-seam roofing sheets. The lightweight units are suitable for a wide variety of roof shapes, giving architects and engineers maximum freedom of design.

Solar PV Laminates – Profiles

Integrated Solar PV Laminates enable roof profiles with straight, convex, or concave shapes to be covered successfully. The Solar PV laminates are fixed parallel to the roof surface and do not require complex mounting frames. Feature roofs, such as pitched and barrel vault profiles are manageable at pitches of up to 60 degrees from the horizontal.

Solar PV Laminates - Triple Junction Technology

The amorphous silicon Solar PV thin film modules are produced using triple junction technology which enables them to generate more electrical energy than crystalline solar cells, with the same power output rating. The different layers of the triple junction technology are individually optimised and each layer converts a different range of the light spectrum into electrical energy. This improves the conversion efficiency in diffuse light conditions making them ideal for use in Northern European. Solar PV Laminates are suitable for cold and warm climates and have a self-cleaning surface requiring minimum maintenance.

Solar PV Laminates - Image Provided by KalzipSolar PV Laminates - By-Pass Circuit

Amorphous thin film laminates are connected to a by-pass circuit so that the whole system power is not significantly reduced when some modules are partially or temporarily shaded. This is in contrast to a similarly shaded crystalline panel which, in similar circumstances, would lose a relatively larger output.

Solar PV Laminates – Existing Roofs

Solar PV Laminates are available to cover new or existing metal roofing. Their flexibility and versatility enable Solar PV Panels to be integrated into any standing seam roof profile.

Solar PV triple junction technology consists of three thin film silicone layers. Each layer is optimised seperately so that it can convert a different colour of the light spectrum into electrical energy

About Solar - PV - Solar PV Panels - Thin Film Solar